Details to pay attention to when operating a plaster line machine
Source: bethatdrop.com Author: Gaotang Machinery Manufacturing Time: 2019-12-12 14:55:00We all know that the details determine the success or failure. The correct and reasonable operating procedures and the perfection of the details can help the gypsum line machine to produce more efficiently and have a longer service life. Today I will take you to understand the details of the gypsum line machine that need attention.
First, users of gypsum line machines should attach importance to the manufacturer's arrangement of professional technical training personnel, handover of operating procedures, precautions, and troubleshooting methods.
Second, after purchasing gypsum line machines, effective management rules and regulations must be formulated to carry out regular inspections and maintenance of the machines. In addition, after the mill has been running for a period of time, it is necessary to conduct a comprehensive inspection of the equipment, especially the rings and rollers For the wearing parts of the blade, the grinding rollers should be replaced if they have not been used for more than 500 hours. The maximum scrapping limit is 10mm. If the wear is severe, but it is still in production, it is very prone to accidental failure. When the rollers are replaced, the rolling bearings in the roller sleeves should be thoroughly cleaned, and then new lubricants should be added, and the damaged parts should be replaced in time.
Third, the fineness of the finished product must be controlled. The uneven thickness is not good for the machine. The speed of the analyzer is the key to control the fineness of the finished product. The user can adjust it according to the fineness requirements.
Fourth, there must be correct startup and shutdown procedures. The equipment must be turned on first to place materials, and the sequence of components when the equipment components are turned on and off. These are all effective ways to maintain the mill parts and extend the service life. The machine should also be cleaned when the machine is shut down, especially there should be no other foreign objects in the grinding room.